Compact Design Low Flow Rate Fine Fog Nozzles/ Flat Spray CBIMV-S series nozzles
|Thread standard||-||Pipe conn. size||See catalog||Standard pressure||-|
|Spray angle||80° (*1)||Spray capacity||0.1–5.5 L/hr||Supply air type||Compressed air|
|Liquid feeding system||Liquid siphon||Mean droplet diameter||20–30 μm||Air consumption||3.75–92 L/min, Normal|
|Air pressure||0.2–0.4 MPa||Free passage diameter||0.2–0.7 mm (*2)|
• Compact version of BIM series producing fine atomization. Space-saving design.
• Able to provide the lowest spray flow rate among all of our pneumatic spray nozzles.
• Clog-resistant design with a low parts count.
• Some CBIMV-S models are available with a spray control adaptor, which can regulate spray ON/OFF with a built-in piston.
(See the PERFORMANCE DATA in the catalog below about the availability of adaptor for each model number.)
• CBIMV-S series are flat spray pneumatic nozzles producing fine atomization with a mean droplet diameter of 30 μm or less (*3).
• Liquid siphon feed type (liquid pressure device is not required).
• Even spray distribution across the entire spray area.
• Spray angle of 80ﾟ.
*1) Spray angle measured at a compressed air pressure of 0.3 MPa and liquid siphon height of 100 mm.
*2) Free passage diameter of the nozzle orifice.
*3) Measured by Laser Doppler Method.
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.
Industries in which this nozzle is used
• Pollution control
• Paper & pulp
See the catalog below for more details.