top_sride_en_01.jpg top_sride_en_02.jpg top_sride_en_03.jpg top_sride_en_04.jpg

top_sride_en_smh_01.jpg top_sride_en_smh_02.jpg top_sride_en_smh_03.jpg top_sride_en_smh_04.jpg

Question
What is a Precision Guarantee of Spray Nozzles? 
Question :  What is a Precision Guarantee of Spray Nozzles? 

Flow Rate Tolerance

±5%

Spray Angle Tolerance

±5%
Spray Angle Tolerance for
Solid Stream Nozzles
Within 3°
Hydraulic Spray Nozzle Precision Guarantee (at the standard spray pressure)

Flow Rate Tolerance

±5%

Spray Angle Tolerance

±5%
Spray Angle Tolerance for
Solid Stream Nozzles
Within 3°

Flow Rate Tolerance

     
±5%

Spray Angle Tolerance

±5%
Spray Angle Tolerance for
Solid Stream Nozzles
Within 3°
Comparison of Spray Distribution Performance

IKEUCHI's nozzle producing flat spray pattern with mountain-shaped distribution.

Similar nozzle from another manufacturer with distorted spray distribution.

Question 
In which industries and applications are nozzles used?
Question :  In which industries and applications are nozzles used?

Manufacturing plants for increasingly compact and highly functional electronic devices.
Increasing product yield with high-precision spray nozzles and humidification using Dry Fog (dry mist).



 
 

Precision cleaning and uses in wet processes

For cleaning of semiconductor wafers, precision cleaning of printed circuit boards, DI water rinsing in wet processes, development, etching, stripping, slurry dispensing and film coating.

Measures against static electricity with Dry Fog Humidification

Overcoming problems such as electrostatic damage and dust adhesion that cannot be solved by static eliminators (ionizers) only.
Reducing pick and place errors, lowering the failure rate and maintaining appropriate humidity in a cleanroom.

Immersion cleaning or liquid agitation in an electroplating bath

With their compact and lightweight design, ejector nozzles deliver excellent performance for agitation of plating solution, immersion cleaning of printed circuit boards, accelerated etching reaction on products submerged in an etchant, and agitation of a solution in a tank.

Slit nozzles used with liquid or air

Slit nozzles produce a thin laminar flow of liquid or air of even thickness across the lateral direction, thus reducing chemical solution cost, DI water cost and air cost, and are suitable for smaller, more compact equipment.

ow-off, drying, air blow

Incorporating a noise suppressing design, TAIFUJet air nozzles boost and blow air with an even impact distribution, and are ideal for blowing off water remaining on PCB surfaces.Helps reduce air consumption

Slit nozzles used with air

Slit nozzles using air, also called air knives, blow air with an even distribution and are suitable for blowing off water remaining on the surfaces of PCBs or flat panels.

Precision cleaning and uses in wet processes

For cleaning of semiconductor wafers, precision cleaning of printed circuit boards, DI water rinsing in wet processes, development, etching, stripping, slurry dispensing and film coating.

Measures against static electricity with Dry Fog Humidification

Overcoming problems such as electrostatic damage and dust adhesion that cannot be solved by static eliminators (ionizers) only.
Reducing pick and place errors, lowering the failure rate and maintaining appropriate humidity in a cleanroom.

 

Immersion cleaning or liquid agitation in an electroplating bath

With their compact and lightweight design, ejector nozzles deliver excellent performance for agitation of plating solution, immersion cleaning of printed circuit boards, accelerated etching reaction on products submerged in an etchant, and agitation of a solution in a tank.

 

Slit nozzles used with liquid or air

Slit nozzles produce a thin laminar flow of liquid or air of even thickness across the lateral direction, thus reducing chemical solution cost, DI water cost and air cost, and are suitable for smaller, more compact equipment.

 

Blow-off, drying, air blow

Incorporating a noise suppressing design, TAIFUJet air nozzles boost and blow air with an even impact distribution, and are ideal for blowing off water remaining on PCB surfaces.Helps reduce air consumption

 

Slit nozzles used with air

Slit nozzles using air, also called air knives, blow air with an even distribution and are suitable for blowing off water remaining on the surfaces of PCBs or flat panels.

 
 It takes just one minute.  
Feel free to contact us for
any request for
spray nozzle selection or a quote.
 
 
 
 It takes just one minute.  
Feel free to contact us for any request for
spray nozzle selection or a quote.
 
Related Products
Scroll
Related Products

Precision cleaning nozzles

VVEA

Dry Fog Humidifier

AKIMist® “E”

Immersion cleaning or liquid agitation nozzles

EJX

Air atomizing slit nozzles

PSN

Slit nozzles used with air

SLNHA-NA

Air booster nozzles

TAIFUJet® TF-F42

Wide angle, flat spray pattern & even spray distribution

LYYP

Full cone, mountain-shaped distribution

INJJX-Y

Precision cleaning nozzles

VVEA

Dry Fog Humidifier

AKIMist® “E”

Immersion cleaning or liquid agitation nozzles

EJX

Air atomizing slit nozzles

PSN

Slit nozzles used with air

SLNHA-NA

Air booster nozzles

TAIFUJet® TF-F42

Wide angle, flat spray pattern & even spray distribution

LYYP

Full cone, mountain-shaped distribution

INJJX-Y