AAP-AL92

series

Hollow Cone

Spray Nozzles

Features

- Entire nozzle is made of
  alumina ceramic having
  excellent wear-resistance
  and corrosion resistance.

- Suitable for slurry spray
  such as lime-gypsum method
  and magnesium hydroxide
  method.

- AAP-AL92 series and
  AJP-AL92 series are
  designed with no whirler
  inside of the nozzles,
  providing large free
  passage diameter and
  minimizing clogging.

JUXP-AL92

series

Full Cone

Spray Nozzles

AJP-AL

series

Full Cone

Spray Nozzles

Delivering Results in,

- Coal-fired power plants
- Iron and steel plant
  manufacturers
- Paper and pulp plant
  manufacturers
- Chemical plant
  manufacturers
- Water granulation
  equipment
- Cleaning towers

GBIM series

Pneumatic Fine

Mist Nozzles

Features

- Multistep atomization structure
  yields average droplet of 60 um,
  spray capacity of 700 l/hr at
  an air-water ratio of 100.
  (GBIM series).

- Reduces running cost with low
  air-water ratio operation.
- Ikeuchi provides a wide range of
  gas cooling nozzles such as fine
  atomization pneumatic nozzle
  (GBIM series), our best-selling
  superior cost performance
  pneumatic nozzle (GSIM, GSIM-T
  series) and high-pressure
  hydraulic return nozzles
  (GSPB series).
- GSPB series is a large spray
  capacity return nozzle with a
  spray capacity of 167 ~ 833
  l/min.

GSIM series

Pneumatic Fine

Mist Nozzles

GSIM series

Pneumatic Fine

Mist Nozzles

Delivering Results in,

- Waste incineration plants
- Glass plants
- Cement plants
- Waste heat redcovery
  plants
- Steel mills

GSPB series

High-Pressure

Hydraulic

Return Nozzles

WTAA series

Bidirectional

Spray Nozzles  
 

Features

- Entire nozzle is made of alumina
  ceramic having excellent wear-
  resistance and corrosion
  resistance.

- Suitable for slurry spray such
  as lime-gypsum method and
  magnesium hydroxide method.

- AAP-AL92 series and AJP-AL92
  series are designed with no
  whirler inside of the nozzles,
  providing large free passage
  diameter and minimizing
  clogging.

Delivering Result in,

 - Coal-fired power plants
- Iron and steel plant 
  manufacturers
- Paper and pulp plant
  manufacturers
- Chemical plant
  manufacturers
- Water granulation
  equipment
- Cleaning towers

Before

introduction  

Features

- Suppress dust dispersion in
  a large room space.
- The photos at left show the
  actual site where the dust
  density was reduced by 90 %,
  from 1.63 mg/m2 to 0.15 mg/m2.
- GSIM series pneumatic nozzles
  are capable of dust suppression
  without significantly wetting
  the environment by spraying
  droplet size of 40 - 80 um in
  large volume swiftly.

Delivering Result in, 

- Industrial waste disposal
- Transfer on conveyer line
- Hopper inlet
- Iron and steel rolling

After

introduction   

GSIM

Spray Unit